DEWALT VS Makita Circular Saw

It used to be when you want a new power tool, you would simply head down to your local hardware store and have peek around, and probably chat with the clerk assigned about this or that, ask particular questions, and then choose out what you wanted. In short, what they had in stock was what was just available to you.

Presently, in the era of online shopping where everything imaginable is available at a simple press of a button, the buying/shopping process can be a tad more overwhelming.

Now, one of the biggest sellers in the power saw market, the circular saws are becoming an increasingly popular selection for a vast range of projects because of their cost-effectiveness as well as their versatility. That’s why if you’re seeking for a power tool to help you in tasks from cross-cutting, ripping, plunge cutting, and beveling, then circular saw is just the right pick for you.

In this article, we’ll review two of the most prominent brands that offer exceptional circular saws that your hard-earned money can buy. So, make sure to stay tuned!

DEWALT vs. Makita Circular Saw Review

1. DEWALT DCS391B 20-Volt MAX Li-Ion Circular Saw (Tool Only)

DEWALT DCS391B 20-Volt MAX Li-Ion Circular Saw (Tool Only)

This of circular saw from DEWALT is perfect for woodworkers who require a dependable equipment that can deal with various kinds of cutting tasks. It is one of those that is not just meant for the use of pro workers but also ones who are still newbies.

DEWALT DCS391B is a tool that must be included in the arsenal of many woodworkers or carpenter. Apart from its capabilities in providing accuracy and precision, it also gives convenience because everything else is pre-set for our task.

Now is this circular saw worthy buying? This one question that you may ask in your mind is easy to answer. After all, with the presence of regular and standard power tools which you may already be more familiar with, being introduced to a new power tool can bring some hesitation. However, in terms of buying a circular saw, there are particular advantages that you can expect.

PROS:

  • Uses a powerful, carbide tipped lade
  • Lightweight and compact in design
  • Built-in safety features
  • Comes with break blade feature that offers emergency stop
  • Complies with the latest industry and OSHA safety standards
Read More:  Bosch DDB181-02 vs. DDS181-02 Review

CONS:

  • As a cordless model, its power may be restricted

2. Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

The Makita 5007MG is a prominent circular saw solution amongst pros and newbies. It comes with an excellent Magnesium construction which is both durable and lightweight. In addition, it comes with a rich set of features that easily makes this unit stand out from the competition.

The only issue with the speed of this circular saw is that it has no-load linear speed of 5,800 revolutions per minute. There’s no way to adjust the speed setting as there’s simply no variable speed control in this unit. Nevertheless, if you’re seeking for a quick and easy way to cut the same material over and over again then something like variable speed will surely matter.

Aside from that, we observed that the 5007MG has the same motor as the more affordable Makita 5007F. It even comes with the same 5,800 revolution per minute speed. That’s why when it comes to power and speed, it doesn’t come with the best performance to price ration out there. Nevertheless, it’s still more than good.

Blade Quality

When it comes to blade quality, this power tool is a standard 7-1/4 inches high-quality ultra-coated framing blade. Meaning, this is a heavy-duty carbide-tipped blade which is very durable and tough. Certainly, it is a heavy-duty woodworking blade that comes with an advanced design that is M-shaped. Also, the blade has 2 pointed tips and a 10 degrees bevel face to optimize the cutting efficiency. This particular design lets the tool to perform more with less. In addition, it is good to note that this top-notch blade is given free of charge with the buy of this circular saw.

Dust extraction

Though there’s no inbuilt dust extraction mechanism in the Makita 50007MG, this tool does come with a dust blower that can send a stream of air on your cutline. You’ll surely get it clear and visible cut line when using this circular saw. Yes, it can become a quite dusty after a while and dedicated dust extraction system in the power tool is usually preferred. Nevertheless, this is one issue that almost all circular saws face and we’re glad to mention that Makita gives a powerful dust blower in this tool.

Read More:  DEWALT DCF887D2 vs DCF887M2 vs DCF895D2 vs DCF895M2

Cutting Capacity

When it comes to this factor, this circular saw does a bit better compare to the 2-3/8 inches of the Makita500F. It can cut at 2-1/2 inches perpendicularly. This particular cutting capacity is more than enough for most consumers as commercial stock rarely exceeds 1-1/2 inches in thickness.

Also, it comes with a versatile bevel cut of 22.5 degrees and 45 degrees which can be locked with the positive stops in this tool. This particular circular saw can eve do a maximum of 56 degrees bevel cut, which is very generous. In addition, those two bevel stops angles of the most typical ones used by carpenters every day. You can also use this circular saw to make regular work like making miter angles, mortises, dados, etc.

What about Accessories?

You don’t really get a lot of accessories with the buy of the Makita 5007MG. It has the unit itself, a case, ripe fence, a hex wrench, and a 7-1/4 inches carbide-tipped framing blade. Nevertheless, all accessories given with this circular saw are vital to the operation of this power tool. In addition, the 7-1/4 inches circular saw blades are not that pricey and available almost anywhere.

How About the Price?

In terms of pricing, it is definitely the 5007MG’s strongest feature. We actually think that it’s a bit on the pricier side, with performance and features that is almost similar to the much cheaper Makita 5007F. Nevertheless, this model comes with a much better build and construction. It is also very durable and tend to last long. It is surely a more dependable and pro unit than the Makita 5007F. That said, despite it being a little pricier than the other units, we think that it’s still reasonably priced as a circular saw of this class. In fact it can be utilized as a heavy-duty circular saw for any cutting application and it won’t choke or stall on anything. We can safely recommend this unit if you can afford its price range.

PROS:

  • Excellent build construction
  • Long-lasting and durable
  • Engineered for a range of applications
  • Comes with ultra-coated framing blade
  • Ergonomic and ease of use

CONS:

  • Consumes 2,300 watts of power

What Are the Differences between DEWALT vs. Makita Circular Saw?

DEWALT DCS391B is categorized as one of the top-end models on the market today. It has been engineered primarily to cut plywood and other particular types of wood materials, though it can still work with other cutting assignments. It also comes with a lightweight design which implies that it guarantees less arm strain, particularly when working on long cutting jobs.

Read More:  Dewalt 20v Vs Milwaukee M18 Drill and Impact Driver

Despite it being lightweight, durability is not totally compromised with this unit. As a cordless choice, it is incorporated with a number of features that makes it a good choice. For one, it features an electric brake for extra safety. This can aid users avoid some saw accidents while working on a particular task.

On the other hand, the Makita 5007MG comes with a powerful 15 amp inductive motor that lets it deliver 5,800 revolutions per minute speed to the blade. In addition, it consumes 2,300W which is quite one the excessive side. Nevertheless, with this kind of power, it should be able to cut through material very easily, whether you’re cutting ceramics, softwood, hardwood, or even metal.

Furthermore, the speed of 5,800 revolution per minute is also fast enough to provide a smooth and clean-cut in a particular material. It will look professional and it would look like machined-cut by a much more pro circular saw.

Recommendation

So, which one is better, DEWALT or Makita?

Well, these two brands are prominent and excel on their respective power tools that offer specific features that no other can provide. The thing here is, both of them are better; there are instances where one is much better than the other, and vice versa.

That’s the reason why, you should always asses your needs first before finally buying one.

Now, if you’ve got any feedback or opinions about our topic today, please feel free to comment down below and we’ll try to get back to you as soon as possible.

 

Leave a Reply

Your email address will not be published. Required fields are marked *