If you are looking for a reliable cordless impact driver, then you must check out the Milwaukee 2453-22. It is a tool that uses 12V RedLithium 2.0 battery packs and can deliver 1200 in. lbs. of torque. It has speeds that can reach 2,650 RPM and 3,550 IPM. It also features a two-mode drive control and the RedLink Plus intelligence, both of which are very distinguishable in Milwaukee’s line of power tools.
- Delivers a peak torque of 1,200 in. lbs.
- Has a no-load speeds of 2,650 RPM and 3,550 IPM
- Comes with two-mode drive control
- Runs on 12V RedLithium battery
- Installed with a Powerstate Brushless Motor
- Features RedLink Plus intelligence
- Slightly difficult to start long screws
- LED light casts shadows
Powerstate Brushless Motor
Since the 1960s, brushless motors have been used in industrial and manufacturing applications to drive conveyor belts, but Milwaukee’s version is a step above the rest out in the market. The company has engineered more steel and copper into their motors, therefore translating to longer motor life, more power, and longer runtime.
Brushless motors no longer need the brush and commutator for the charge to travel from the battery to the commutator. The communication is directly between the electronics and the stationary windings. There is no physical contact between the brush and the spinning commutator so there will be no significant energy loss when using the tool.
Milwaukee’s Powerstate Brushless Motors outperforms any of its kind because of their high-grade materials and more power-generating components.
RedLink Plus Intelligence
The 2453-22 can deliver up to 1,200 in. lbs. of torque which is very impressive. It also boasts a no-load speed of 2,650 revolutions per minute and a no-load rate of 3,550 impacts per minute. This kind of high-performing motor will only be as good if your power tool does not fail during workloads.
The RedLink Plus intelligence feature that comes with this impact driver protects the tool from overloading, overheating, and over-discharging. It provides and maintains optimum performance so your tool can last you a long time.
This system continuously monitors the inner workings of the 2453-22. The technology detects the heat that builds up whenever you use the tool and takes preemptive action. Heat build-up might melt some of the parts inside the tool and cause it to malfunction or eventually fail. This is when the feature kicks in and protects the tool and the battery when it senses heat build-up. This then prolongs the lifespan of the tool.
RedLithium 2.0 Battery Packs
Lithium ion batteries have been the next best thing compared to the less efficient NiCad batteries. This innovative option used in power tools give them the extra power and longer lifespan that the NiCad could not give. Moreover, Milwaukee has taken lithium ion batteries and transformed them to become even better.
The superior RedLithium 2.0 battery packs that power the 2453-22 impact driver can deliver more runtime, more power, and more recharges. They are more efficient and cost-effective than standard lithium ion batteries. The pack offers 2.0 amp-hours of runtime and runs cooler than its counterparts. It is also a match for the lighter and more compact design of the tool so you will experience less fatigue.
The battery life is maximized thanks to the temperature management system and individual cell monitoring. This is definitely a revolutionary design that Milwaukee boasts in their high-performing power tools.
Other Added Features
This impact driver has a two-drive mode that lets you choose the optimum speed for the kind of work you need to do. For light and delicate work, you can set the speed to low which runs at 1,200 RPM. For full-speed applications, the driver will produce 2,650 RPM max. Switching modes is as easy as pressing a button, and it has a light indicator to know which mode you have selected.
There is also a battery life gauge built into the tool so you can see how much more runtime you have left before you need to recharge. If you have spare battery packs from other power tools from Milwaukee’s M12 line, then stopping in the middle of the job is not a problem for you.
The impact driver also has a built-in LED light so dark work areas will not be a limitation. If you are going to be choosing an impact driver, get one that has this basic feature. It is more important than anyone gives it credit for.
Comparison with Milwaukee 2462-20 M12
Another tool from Milwaukee’s M12 line is the 2462-20 impact driver. It may be light and portable, but it can deliver a maximum of 1,000 in. lbs. of torque, a no-load speed of 2,500 revolutions per minute, and 3,300 impacts per minute.
The 2453-22 outperforms the 2462-20 because the former not only offers more power and speed but it has Milwaukee’s revolutionary technology that gives it an edge compared to the latter.
The high performance of the 2453-22 can handle more tasks and even light construction jobs. Its two-mode drive can let you work smoothly on light tasks as well. So if you want a more versatile power tool that can handle most daily tasks then this impact driver is your best bet.
There are numerous brushless power tools available, and it can get confusing which ones offer the best value for your money. Thankfully, Milwaukee makes it easier for customers because they have made an effort to provide us with tools that redefine the new generation power tools. The kind of technological innovations they put in their tools is unmatched.
Milwaukee’s 2453-22 XC utilizes a different and exclusive brand of technology which makes it a cut above the rest. It is a compact and lightweight impact driver that still delivers the full power performance that you look for in a power tool. Yes, it may cost more than other models, you not only get a complete kit but you get all the impressive features that make it one of the best in the market.