Brushless tools have become increasingly popular nowadays. They are supposed to be better than their brushed counterparts. Tools with brushless motors are more efficient and can last a lot longer when used on the job.
Brushless motors do not have brushes and commutators, and they are smarter tools. They are able to detect how much power it has to give for the task at hand. This way you will less likely overwork the tool preventing from doing damage to the materials.
If you are interested in checking out the impressive technology of brushless tools, check out some of these tools from Dewalt.
Dewalt DCD790D2 20V MAX XR Lithium-Ion Brushless Compact Drill Driver Kit
This tool may not come off as cheap at around $265 but be assured that this drill driver is well worth your money. It packs enough power to take on even tough jobs.
The drill has a no-load speed of 0-600, 0-2,000 RPM, and a max power of 360 UWO. It measures 7.2 in. from front to back and only weighs 3.5 lbs. This is very convenient to use in small spaces and even for overhead applications.
The metal ratcheting chuck is ½” in size, and you get 15 clutch settings. There is also a helpful LED light placed at the foot of the tool, so it does not cast shadows when you want more light in your work area.
In this kit, you will also get two 20V MAX XR 2.0 Ah lithium-ion batteries, a charger, a belt hook, and an on-board bit holder. The charger takes about 35 minutes to recharge a battery fully. For storage, this comes in a kit box, so the tool is safe and secure when not being used.
- Can handle most tough household jobs
- Fast battery charger
- Long lasting battery
- Compact and lightweight
- Secure storage
- Chuck need constant retightening
- Does not come with screw or drill bits
- Stronger vibration when using the second speed
Dewalt DCD791D2 20V MAX XR Li-Ion Brushless Compact Drill Driver Kit
If you want a smaller and more affordable drill driver, try the one that comes with the DCD791D2 kit. If you need one for lighter applications, this little tool will be able to handle it. This will only cost you less than $180.
The drill driver has two-speed settings. You can use the higher 0-2,000 RPM for faster application speeds, and the slower 0-550 can even be used to drill smaller screws. This also features a ½” metal ratcheting chuck.
The tool measures 6.9 in. from front to back and weighs 3.4 lbs. This will be fit to use in tight spaces. It will also be easier to use during overhead applications and will not cause much arm fatigue. The LED lights built into the tool have three modes that are bright enough to illuminate hard to see work areas.
When you purchase this kit, you will also get two XR 2.0 Ah battery packs, a charger, a belt hook, and of course a kit box.
- Compact and lightweight
- Can handle light or tough jobs
- Has a battery fuel gauge
- LED lights have three modes
- Longer motor runtime
- The chuck loosens when the drill stops
- Very noisy
- No off for the LED lights
Dewalt DCD795D2 20V XR Lithium-Ion Brushless Compact Hammer Drill Kit
This brushless hammer drill kit is what you need for light fastening and drilling jobs as well as fastening and drilling on masonry materials. This compact hammer drill kit will cost you less than $264. Brushless tools are usually more expensive than brushed tools.
The hammer drill can deliver speeds from 0-600 or 0-2,000 RPM. For masonry materials, it can give a powerful 0-34,000 BPM. It has 360 UWO, which is Dewalt’s own measure of power for their tools. For holding the drill bits, it has a ½” metal ratcheting chuck.
The tool measures 7.8 in. from front to back and weighs 3.6 lbs. This is designed to be light enough not to cause much arm fatigue during longer applications.
The XR Li-Ion batteries that come with this fully recharge after 35 minutes of charging. It is supposed to provide more runtime compared to standard Li-ion batteries. This also has a fuel gauge to let you know at which capacity the battery still has.
Also included in this kit are a spare XR Li-Ion battery, a charger, belt hook, on-board bit holder, and a kit box.
- Compact and lightweight
- Provides enough power for masonry
- Has longer runtime
- Has a built-in LED
- Fast charging battery
- Chuck needs to be constantly retightened
- Expensive replacement batteries
- A bit expensive at more than $200
All these tools are compact, lightweight, and brushless. They are designed to handle lighter jobs because cordless drills are usually not as powerful as corded ones. They are easier to use for small work areas as well as dark ones.
The DCD790D2 and DCD791D2 are both drill driver kits. The glaring difference between the two is their price tag. The former is much more expensive than the latter. The DCD791D2 may be able to handle lighter jobs better than the other because it has a lower speed setting option.
The DCD795D2 is a hammer drill designed to be able to handle fastening and drilling on masonry materials. It can deliver a powerful hammering action to take on tougher jobs.
They all have same warranties as they are all from one manufacturer. The kits are backed by a three-year limited warranty and a one-year free service. You also have a 90-day money back guarantee if you are not completely satisfied with your tool’s performance.
If you want a quality drill driver but on a tighter budget, the DCD791D2 drill driver kit may be enough for you. There is not much difference compared to the DCD790D2 except that it is lighter and can be slow enough for very light tasks. The DCD795D2 is perfect for your masonry needs. It has a powerful hammering action that the drill drivers do not have.