Craftsman C3 19.2 Cordless Drill Impact Driver and Wrench

Cordless drills operate on rechargeable batteries and allow users to work more freely.

Without the electric cord getting in the way, you can go from one place to another without any hassle.

Hence, a cordless drill is a worker’s best friend when fastening and releasing screws on sturdy materials.

What to Consider

Using the right hand tool or power tool enables workers to finish their jobs faster and more efficiently.

Before spending on a power tool, you must know the features to look for in a cordless drill. Some of the essential critical things you need to consider are enumerated below.

Battery Size

The battery size is measured not by inches but by amp hours. If you need a drill that you can use for an extended period, then get one with more substantial amp hours.

Cordless drills use a battery for power, and it is the perfect partner tool of people who are always on the go.

Drills that are used for lightweight jobs come with four to eight voltage power. For DIY and home projects, 12 to 18 volts will be enough to accomplish a lot of tasks.

For professional workers who do big onsite jobs, drills with higher voltage are ideal. However, tools with higher voltage tend to weigh heavier.

Right Chuck

Using the right size chuck will control the maximum size of a bit shank the drill can hold. Available chuck sizes are 1/4, ½, and 3/8 inch.

The standard size most users have is the 1/2-inch. This dimension is perfect for drilling small to large holes in wood or concrete.

Read More:  DEWALT DCF894B Vs. DCF894HB Vs. DCF880B Vs DCF899B

Clutch Level

A clutch lets you fine-tune the driving force. It helps protect the drill motor from overheating when excessive resistance occurs. Users can preset the level of resistance to the driving force of a drill.

When that specific level is reached, the clutch will slip, and You will hear the sound of a “click.” If this happens, do not add any rotational force to prevent the screw from stripping or snapping.

Let’s Compare

Craftsman was initially established by Sears and acquired by Stanley Black & Decker in 2017. It has been an American icon brand for almost a century.

Further, Craftsman is one of the trusted trademarks of Homeowners, professional builders, mechanics, and DIY enthusiasts.

Its re-engineered products promise superior quality, high-performance, and reliability.

Craftsman C3 19.2V 3/8″ Lithium-Ion Drill Driver Kit

Craftsman C3 19.2 Volt 3/8 Inch Drill Driver Newest Model 315.DD2015 (Bare Tool, No Battery or Charger Included) Bulk Packaged


Craftsman C3 3/8″ drill is an affordable kit that comes with a 19.2V lithium-ion battery, which you can use on all C# products.

Beginners, DIY enthusiasts, and homeowners will find this tool comfortable to use while providing enough torque and power to complete your drilling requirements.

Fade-Free Lithium-Ion Battery

The drill includes a compact Lithium-Ion battery and a multi-chemistry charger.

Craftsman customers love the battery upgrade from Ni-Cd type to Li-ion that makes the tool more efficient and also increases its total runtime. This 19.2V is compatible with all Craftsman C3 products.

24-Clutch Setting

Craftsman C3’s 24-clutch setting can help you do your tasks without the risk of overdriving at the screws.

It has an adjustable clutch torque offering a maximum of 250 inch-pounds and motor speed from zero to 600 RPM.

The tool has a 3/8-inch keyless chuck type that can tighten bits quickly and securely.  Additionally, the forward-reverse switch can be used to help you change directions comfortably.

Micro-Texture Over-Mold Grip

The minor texture over-mold grip gives you better control and comfort while performing a variety of applications at home.

It is lightweight and has an onboard bit storage making the bits easily accessible while you are busy working. Finally, the tool comes with a one-year warranty.

Craftsman C3 19.2V 1/4″ Impact Driver Model 5727.1 (Bare Tool)

Craftsman C3 19.2 Volt 1/4 Inch Impact Driver Model 5727.1 (Newest Version) (Bare Tool, No Battery or Charger Included)

If you want a tool for home projects and tough jobs, then get the Craftsman C3 19.2 Volt ¼-inch impact driver model 5727.1.

Read More:  PORTER-CABLE PCCK619l2 Vs. PCCK602l2 Vs. PCCK604l2

You can use this powerful tool for carpentry and other materials like plastic and metal.

You can be sure that the gearbox is safe from debris and dirt with its die-cast aluminum built. This tool boasts of sturdiness that can handle harsh impacts and can last for years.

Powerful Torque

This tool is versatile that you can get 0 to 3,500 IPM to drive lag bolts and long screws quickly.  For stability and accuracy, you can gradually increase the speed from zero to 2,500 RPM.

You can accomplish even the toughest jobs in no time with this robust cordless impact driver. This Craftsman C3 19.2V impact driver also delivers a max torque of 1,600 inch-pounds.

Electric Brake

The electric brake of this tool allows for quick stops. This feature makes the motor stop faster than it would if the device has no electronic restraint. It prevents injuries from unintentional tool kickbacks.


The 1/4″ quick-connect collet enables you to make quick bit changes. Additionally, it has an ergonomic handle that reduces stress on your hands and body. Finally, it has a built-in LED light to illuminate dark workspaces.

CRAFTSMAN V20 Impact Wrench Cordless Kit


CRAFTSMAN V20 Impact Wrench Cordless Kit (CMCF900M1)

One of the essential tools you need, if you are a mechanic, carpenter, construction worker, or DIY enthusiast, is the cordless wrench. This tool is also useful when doing home renovations.

The Craftsman heavy-duty impact wrench allows you to save time and energy when working on tasks.

It includes a motor with an adjustable speed that you can control according to your need.


It gives a maximum torque of 200 foot-pounds with a 1/2″ drive. Additionally, the tool generates a top speed of 3,000 RPM and IPM. It is the reason why professionals also love this heavy-duty tool.

Comfort in Use

It is also ergonomically designed; thus, you can comfortably hold it without causing fatigue on your hand and wrist.

The built-in LED lights help users to see while working in tight and dark areas appropriately.

Read More:  Corded Drill vs Cordless Drill


The tool works using a rechargeable battery. Hence, you can continuously work even without the availability of a power supply or gasoline.

The 19.2V battery can provide enough power to complete your required task for the day.


Below are some questions and answers which might help you in using a cordless drill driver.

How do you change the drill bit on a Craftsman cordless drill?

You can do this in three simple steps as follows:

  1. Turn the power switch off before removing the bit.
  2. Firmly hold the drill’s body while twisting counterclockwise the collar of the chuck. Once loosened, turn the collar a few more times.
  3. Pull out the drill bit from the chuck.

How do I know if a cordless drill battery is good or bad?

To know if your power drill battery is working, you can do the following:

  • Remove the battery and charge it for three hours.
  • Place the charged battery into the power drill and turn on the trigger.
  • If the power drill doesn’t work even after three hours of charging, then you need to replace the dead cell.

Why do cordless drills have numbers on them?

The numbers you see on cordless drills show the torque or rotary power of the tool. The higher the numbers, the greater the torque force is.

These numbers are useful to determine if you are using the right amount of turning power to prevent the screws from stripping.


Craftsman is an American famous brand for its various hand tools & powerful devices, lawn, and garden tools. The Craftsman C3 drills are just some of their popular products.

The C3 line uses ergonomic design and technology and uses Li-Ion batteries to help you accomplish your jobs faster and more efficiently.