DEWALT DCF681N2 8V Max Gyroscopic Screwdriver Review

It is a tool for reaming and fastening applications. It features a motion activated reversing control and variable speed for precise control. It can easily and quickly ream ½, ¾, and 1-inch conduits. It is powered by an 8V Max battery and has a built-in LED work light. This is a screwdriver that will be helpful for various applications.

The gyroscopic screwdriver does not have a clutch for you to be able to control the speed manually. Perhaps it would be a little difficult at first to adjust to the motion-sensor feature of the tool, but I’m sure when you give it some time and a little fumbling around, you will get the hang of it.

DEWALT DCF681N2 8V Max Gyroscopic Screwdriver with Conduit Reamer

 

Pros:

  • Comes with motion activated reverse and speed control
  • Has 430 RPM of max torque
  • Features a battery charge indicator
  • Designed with a built-in LED work light
  • Powered by 8V max battery

Cons:

  • Not for heavy-duty applications
  • No clutch feature

Our Opinion

Powerfully Convenient to Use

DEWALT DCF681N2 8V Max Gyroscopic Screwdriver with Conduit ReamerThe Dewalt DCF681N2 is a portable and lightweight tool for your everyday reaming and fastening needs. It has a maximum speed of up to 430 revolutions per minute which can be controlled by twisting your wrist. The reverse control is also motion activated, so there are no more pressing buttons when you need your tool to deliver the specific amount to suit the task at hand.

Cordless and Rechargeable

The DCF681N2 uses an 8V Max lithium ion battery to operate. Its average battery life is 10.4 hours, and the kit includes a fast charger.

Cordless power tools are very convenient for the average homeowner. It is compact for easy storage, and you can easily take on jobs around the house with no fuss. Unlike, corded tools, you do not need to constantly move the wire out of the way when you use the tool. You also do not have to have a power outlet nearby to be able to use the tool in any place around the house. No more extra-long extension cords needed because you can take it with you anywhere.

Using lithium ion batteries for this tool makes it more efficient because it operates on a battery with high energy density. You can complete your tasks easy because it has long battery life. When not in use, it can hold its charge for months so you can just pick it up and it is ready to be used again. Cost effective lithium ion batteries will have a longer life cycle than any other kind of battery. It no longer needs to be primed, and you do not have to periodically discharge the battery because it will not lose its maximum capacity for a long time.

Added Features

The tool has a built-in battery charge indicator so you can see when you need to plug it in. An indicator to let you know when to recharge your tools is very helpful before you start a project. You will be able to gauge if you think you need to charge it first to avoid stopping in the middle of your work or whether it has enough power for the job you are planning to use it for or not.

An LED light is also built into the tool itself. It will provide illumination for dark work areas. The LED work light installed will provide shadowless bright light for when you cannot clearly see where you need to point the tool. This can be helpful anywhere with insufficient lighting because your eyes would not be straining too much and you will be able to do your job accurately with less error.

Covered by 30-day Limited Warranty

DEWALT DCF681N2 8V Max Gyroscopic Screwdriver with Conduit ReamerDewalt backs this product up with a three-year limited warranty, a one-year free service, and 90-day money back guarantee.

Their three-year limited warranty states that the company will repair or replace your tools if the faultiness of the item is not caused by normal wear and tear or abuse of the tool. If any attempts to repair the product were made by anyone else other than Dewalt the warranty is void. This warranty does not cover accessories, only the tool itself. You can only apply the warranty if you have been using it with care and if it is within three years from the date of purchase.

It is also covered by Dewalt’s one-year free service contract. For the first year from the date of purchase, the company will maintain your tool and replace worn parts for free, of course, only if the parts you want to have replaced is worn out by normal use.

You can also return the product within 90 days from the date of purchase if you are not completely satisfied with your power tool at all. With no questions asked, the company will give you a full refund as long as you still have the receipt.

Comparison with Dewalt DCF682N1

Both units are screwdrivers, but the DCF682N1 is the Gyroscopic Inline kind. It’s lightweight, compact and handy and comes with batteries and a charger. It has a feature called Battery Stage of Charge which helps you monitor the juice left for you to use. It is motion activated with variable speed settings with a max torque of 430 revolutions per minute. Its performance makes it great for plastic, wood, and light-gauge metal.

Compared to the DCF681N2, they have a number of similarities, like the max torque for one and the motion activated speed control for another. They both have work lights that provide illumination and battery status indicators as well.

DEWALT DCF681N2 8V Max Gyroscopic Screwdriver with Conduit Reamer

Conclusion:

The Dewalt DCF681N2 is a compact and lightweight gyroscopic screwdriver and conduit reamer that is perfect for your everyday home use. It is easy to use and has a long-lasting battery with a fast charger. This innovative motion sensor screwdriver is recommended for every household. You can use it for basic home improvements and can be operated using only one hand because you only need to twist your wrist to adjust the speed and the reverse control action.