Makita XPH10Z Vs. XPH12Z Vs. XPH07Z

Out of all the most beneficial power tools currently avaialble in the market nowadays, probably the tool that is in everyone’s combo kit is the hammer drill-driver.

Back in the past, hammer drill-driver were not a favorite pick for anybody, because they didn’t come with a ton of power, and always seemed to shut down right in the middle of the work. Hammer drill-drivers were the most prone to such problem, most likely because the high level of torque needed to get the task done put a whole lot of stain on the energy stores.

Gladly, all that has transitioned in latest years, thanks to a lot of breakthroughs in battery innovation. Now, you can go out and purchase a hammer drill-driver for any kind of task, from simple home improvement tasks to the most daunting tasks that require a large amounts power sustained for a long period of time.

Hammer drill-drivers can do a lot of things, and above all else, the degree of convneience that hammer drills can bring to the table is certainly advantagesous. That said, we want to share you our top picks for the best hammer drill-drivers in the market today. Read on!

Makita XPH10Z vs. XPH12Z vs. XPH07Z

1. Makita XPH10Z 18V LXT Lithium-Ion Cordless 1/2″ Hammer Driver-Drill (Tool Only)

Makita XPH10Z 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill (Tool Only)

What You Will Get With This Product?

This hammer driver-drill is perfect for portability. With the compact size that it includes, this portability makes this power tool an ideal one.

The li-ion battery gets completely charged just in about thirty minutes, and it comes with a high ratio of retaining the charge while doing the job and while idling. This hammer driver-drill can function on concrete, masonry, wood, metal in dual modes. As per requirement, it can act as a driver-drill and when needed, a hammer driver-drill.

Amalgamating the lightweight design with its ergonomics lets you have a balanced power tool that you can utilize for long with less strain. In addition, this power tool comes with an excellent dual LED lights that do a great output in illuminating the workplace.

Pros:

  • Durable making it a reliable tool
  • Impressive torque output
  • Two-speed transmission
  • Less-expensive
  • Compact, lightweight design fits into tight areas

Cons:

  • No extra battery needed
  • Battery and other accessories are not included 

Top FAQs on This Product:

Q: Is the charger support 220 volts?

A: The charger says it is rated 120V to 240V.

Q: What accessories do you come with?

A: It doesn’t come with any accessories, just the drill.

Q: What are the best fitting bits for this tool?

A: Its keyless chuck holds on to most anything well.

What Take on This Product:

Makita XPH10Z boasts high torque rate that is beneficial in handling hard applications. The tool utilizes mechanical transmission, which is adjustable to 2-dofferent speed settings to fit the certain function you require to perform.

Read More:  Bosch RH540M vs RH540S Rotary Hammer Review

Its variable trigger features assists the user to control hoe slow or fast the drill operates. Looking at its design, this is one of the lightweight hammer driver-drills from Makita weighing only 3.4 pounds. Another feature that stands out of this power tool is the li-ion batteries, which are known for longevity and fast charging capability when compared to other batteries.

2. Makita XPH12Z 18V LXT Lithium-Ion Brushless Cordless 1/2″ Hammer Driver-Drill, Tool Only

Makita XPH12Z 18V LXT Lithium-Ion Brushless Cordless 1/2" Hammer Driver-Drill, Tool Only

What You Will Get With This Product?

This hammer driver-drill composes of an innovatively engineered brushless motor. This get rids of the requirement of carbon brushes and lets the power tool to operate for longer period of time without rendering smoke. The power tool can coordinate the operation time and power to give powerful performance on steel, brick, concrete, masonry, and other harder materials.

This kind of brushless motor makes the hammer driver-drill a little bit ideal for the heavy-duty tasks and the jobs of longer duration. Its dual speed motor gives revolutions per minute of 2,000, and an optimal torque of 530 inch per pounds. Because it’s sturdy, it can bear the fatigue of regular usage on harshest workplace settings.

Pros:

  • Provision of dual LED lights
  • Motor eliminates the use of carbon brushes
  • Battery is maximized for 50% more operation time
  • Dual speed design to cover certain kinds of applications
  • Motor efficiently utilizes energy to match RPM and torque

Cons:

  • High-pitched whine
  • Gets stuck in hammer mode 

Top FAQs on This Product:

Q: Is it possible to put a handle on this like the larger hammer drill?

A: Yes but you must get that attachment separate.

Q: Where is this made?

A: This power tool is made in China.

Q: Can the hammer function be turned off for a regular drilling?

A: Yes, but you’d better turn it back for regular drilling, otherwise its clutch that holds the bit might ruined in a short time.

What Take on This Product:

This hammer driver-drill features an ergonomic design. Its grip is rubberized which makes it more comfortable and softer for the consumer. It gives an anti-slip grip that precludes the incidents of stripping or slipping. The light comes with dual LED lights installed to illuminate the poorly-lit areas.

This enhances the ultimate output precision. All in all, the power tools are lightweight and compact. It also doesn’t cause extra strain to the user and precludes the exertion of wrists, shoulder, and arm during longer tasks. The hammer and chuck function is maximized and is now better compared to some units.

3. Makita XPH07Z 18V LXT Lithium-Ion Brushless Cordless 1/2″ Hammer Driver-Drill, Tool Only

Makita XPH07Z 18V LXT Lithium-Ion Brushless Cordless 1/2" Hammer Driver-Drill, Tool Only

What You Will Get With This Product?

This unit’s compact li-ion battery and 18V LXT comes in many variants, but the XPH07Z utilizes either 5.0Ah or 4.0Ah. Both of them utilize the same Rapid Optimum Charger which can give a full charge in less than 36 minutes and 45 minutes to the 5.0Ah and 4.0Ah respectively.

Read More:  DEWALT DCK290L2 Vs. DCK299M2 Vs. DCK285C2

Not only that, this particular charger has communicating capabilities that can monitor that temperature, current, and voltage of the incoming electricity through a special integrated chip. This feature is there to maximize battery capacity and longevity.

While brushless motors are not really new technology, they make your power tools smarter by putting greater durability and performance. Actually, they’ve been around since the 60s and have recently resurfaced because of attention from huge companies like Makita.

Power tools that come with brushless motors are usually pricier mainly due to the fact that electronics required making it work seamlessly. That said, this type of tool is better fitted for pros and those who want to use this regularly.

Pros:

  • Comes with 2-speed transmission of 0 to 550 and 0 to 2,100 RPM
  • Powered by the exclusive Star Protection battery
  • Designed as a workhorse tool
  • Incorporated with Makita brushless motor
  • Works efficiently with masonry, wood, and metal

Cons:

  • Continuous high-powered use might cause battery to drain faster
  • Too heavy for smaller tasks 

Top FAQs on This Product:

Q: Can this drill fit in the standard plastic Makita combo case?

A: No, you must purchase the XT257 case.

Q: Could you use this to polish your car if using the car polish adaptor?

A: Yes, but it would be overkill because this drill comes with a lot of torque.

Q: What’s the real weight of this unit?

A: Just under the 5.8 ready to go. 

What Take on This Product:

With the brushless motors in this unit, it makes the communication with the stationary windings smarter and more efficient. Since it easily detects the lack of resistance, it only draws a lesser amount of energy from the batteries. This particular type of motor won’t experience the usual voltage and friction as a result of brushless dragging against the commutator, and doesn’t really lose energy while operating.

 

What is the Difference between Makita XPH10Z vs. XPH12Z vs. XPH07Z?

The Makita XPH10Z has the Makita integrated motor with 4-pole in work – 480 inch per pounds of optimal torque can be produced. Also, the tool comes with a variable speed design of two-transmission speeds which are 0 to 600 revolutions per minute and 0 to 1,900 revolutions per minute, and 0 to 9,000 beats per minute and 0 to 28,500 beats per minute. Now, in high-speed mode, the tool can go up to 28,500 beats per minute and 1,900 revolution per minute if needed.

Read More:  Hilti VS Bosch VS Makita Rotary Hammer Drill

You see, Makita batteries have actually always upheld their positions in terms of front row. The 18 volts li-ion batteries are one of the brand’s most renowned battery lines. Also, this power tool is operated by Makita’s leading 18 volts li-ion sliding battery. With this superior battery, the power tool can get charged very fast and work for a longer time. Less time will be spent on the charger and more time would be available during work time.

As for the Makita XPH12Z, it features an ergonomic design. Its grip is rubberized which makes it more comfortable and softer for the consumer. It gives an anti-slip grip that precludes the incidents of stripping or slipping. The light comes with dual LED lights installed to illuminate the poorly-lit areas.

And lastly, the Makita XPH07Z unit’s compact li-ion battery and 18V LXT comes in many variants, but the XPH07Z utilizes either 5.0Ah or 4.0Ah. Both of them utilize the same Rapid Optimum Charger which can give a full charge in less than 36 minutes and 45 minutes to the 5.0Ah and 4.0Ah respectively.

Conclusion

So, all of the hammer driver-drills above are impressively good. Acquiring one of them can actually go a long way when regards to changing your current combo kit. We chose to provide you with a genuine review of the hammer driver-drill that is best for your needs, and we’ve come to a decision that the best cordless combo kit in this post is the Makita XPH10Z.

The power tool is very unique and features a lot of advantages that none of the other hammer driver-drills listed in this article can provide. On the other hand, if you don’t really have the budget for the said hammer driver-drill, then you can resort between Makita XPH12Z vs. Makita XPH07Z. They are both quality hammer driver-drill units.

If you have any feedback or suggestions about our topic, please comment down below.

Leave a Reply

Your email address will not be published. Required fields are marked *