Wen 12 Inch Vs. 10 Inch Vs 8 Inch Drill Press

High precision drilling finishes are necessary for any woodworker or metal worker. While hand drills are easy to handle and use, they cannot achieve the perfection of a drill press, which is why every workshop needs one. The best drill press is simply a combination of a powerful motor with a high precision focus and durable parts. Investing in a high-quality drill press attracts a high price tag, which is why Wen drill presses will save you a lot of money.

Wen has been manufacturing power tools since 1951, and their quality has improved immensely over the years. Their drill press technology is famous for using durable induction motors. Their drills also have more speed settings than most models. This review is a comparison of their top models, the 12-inch, 10-inch, and 8-inch. If you are not sure about what you will get from your drill, here is a summary of what each of the three WEN presses can do.

Wen 4214 is a 12-inch, which makes it the workhorse of the workshop. It takes up little space and comes with a keyed metallic chuck that can travel up to 3-1/8 inches. It has a 2/3HP induction motor able to bore through metal with a 5/8. 4210 also features nearly similar features to the 4214 with a lower capacity able to drill into ½-inch of steel. 4208 is also a versatile press with five different speeds and a 1/3-HP induction motor.

Here is a detailed review of each drill press

1. Wen 4214 12-Inch Variable Speed Drill Press

WEN 4214 12-Inch Variable Speed Drill Press


WEN 4214 is the best drill for the money if you need a great drill press for frequent woodwork and metal drilling. This drill press has a durable 2/3HP induction motor that delivers a powerful torque with each stroke and an unlimited speed variety from 580RPM to 3200RPM. Variable speeds allow you to apply it on material with different densities ranging from metals to softwood. It has a friendly design with lots of features that enable it to perform almost any drilling task on site.

It measures is 37 inches bottom to top for easy handling and has a glass interface that makes it easy to operate and read. It has a large spindle that travels 3-1/8 inches and has a depth stop setting that makes it easy to make holes with uniform depth. You can also use the laser guide to set equal distance between holes for uniformity. Its LED display tells you the exact speed of the motor every time.

This drill press has a movable iron cast table measuring 9-1/2 by 9-1.2, which gives you enough room to work with any size of the material. The table has a beveling angle of 45 degrees left and right that makes it easy to drill at tight positions. Its table also has a roller extension with more storage room. It also features a 5/8-inch keyed chuck that grips tightly on your bits.

It can accommodate a wide variety of bits allowing you to drill both small and large holes. The table is also removable, allowing you to use the base directly when drilling into large planks.

Read More:  Ryobi P271 vs P205G Review

Key Features

  • Power: 5amps at 120V
  • Motor: 2/3 HP
  • Speed: 580-3200RPM
  • Chuck: 5/8-Inch, Keyed
  • Cut depth: 3-1/8 inches
  • Table: 9-1/2inches, 45 degrees beveling

Pros

  • 12-Inch Swing accepts wider stock
  • Large iron cast table
  • Unlimited variable speeds
  • The table-roller extension gives more room.
  • It has a metallic keyed chuck with a sturdy grip
  • Laser guide light for high precision

Cons

  • It doesn`t include a spindle lock.
  • lots of assembly needed

Top FAQs

Q: Can I use this as an oscillating sander?

A: No. You can attach a sander, although oscillating is not included.

Q: Is the base stable?

A: Yes. It is 16×10 inches, which is stable enough. It also has holes on the base for locking securely to the table.

Q: What is the taper size for this drill press?

A: The chuck is 5/8-Inch, a 2 MT 5/8-inch taper is the best.

Q: What type of pulley does this drill press have?

A: It has a metallic pulley

Q: What is the Amperage?

A: 5-amps

2. WEN 4210T 10-Inch Drill Press 

WEN 4210T 10 In. Drill Press with Laser

When looking for a drill press that can handle any standard and light projects, then this drill press will serve you well. It has a 10-inch swing allowing you to work on any wood within the 20-inch width capacity. It can also handle light metal drilling about 1 inch thick or less. This drill press is particularly budget-friendly. It is also straightforward and easy to handle, so you don’t have to be a professional to accomplish your projects.

It has a powerful 1/3HP motor with a low power consumption running at just 3.2-Amps. Its most significant advantage is the versatility of its application. It has a wide speed range with five-speed settings at 600, 1100, 1700, 2400, and 3100RPM allowing you to drill through lumber with varying densities. The spindle on this drill press can travel depth of 2-1/2 inches, which will enable you to drive deep into thick lumber.

This drill press has a durable induction motor with ball bearings designed to reduce wearing when handling heavy-duty projects. Its table is adjustable and measures 7-5/8 inches on each side, allowing you to load wide pieces comfortably. It also features a depth stop allowing to drill a uniform depth without having to repeat the settings.

The table has a beveling angle of 45 degrees left and right, allowing you to drill comfortably at an angle. Its beveling worktable is calibrated, you can set accurate angles for each project. This drill press also has a laser guiding light to increase the precision. It also comes with a powerful work light that allows you to work under low lighting.

Key Features

  • Power: 3.2amps at 120V
  • Motor:1/3 HP
  • Speed: 600-3200RPM
  • Chuck: 1/2-Inch, Keyed
  • Cut depth: 2-1/2 inches
  • Table: 7-5/8 inches, 45 degrees beveling

Pros

  • Five speeds for handling a wide variety of lumber
  • Durable metallic build
  • Laser guide light for accuracy
  • Powerful work light
  • Low power consumption

Cons

  • Not suitable for heavy metal drilling.
  • the table is still too small for large pieces over 12 inches

Top FAQs

Q: Does this drill press come fully assembled?

A: No. It is simple to assemble, though. Just three main parts to put together.

Read More:  WEN 4208 vs 4210 vs 4212 vs 4214 vs SKIL 3320-01 Drill Press

Q: What is the chuck size?

A: The chuck is 1/2-Inches

Q: Can I use it to drill through steel?

A: Yes. If it is very light, anything around ½ inches thick or less

Q: Is the chuck removable?

A: Yes

3. WEN 4208 8-Inch drill press

WEN 4208 8 in. 5-Speed Drill Press

WEN 4208 is probably the most budget-friendly drill press in the market. It has more value for your money, considering its iron cast construction and versatile application. It also features five different speed settings like other WEN models retaining the ability to handle a wide range of projects. Its greatest advantage is the 1/3HP four-pole motor with rubber bearings build to last a long time under heavy-duty use.

It has a ½-Inch chuck, which accepts most drill bits in the market, allowing you to perform any projects on this drill. Its spindle has a capacity of 2- Inches so you can work comfortably even with thick lumber. Its speed settings are 740, 1100, 1530, 2100, and 3140 RPM. The high speed allows you to complete tasks quickly when handling light lumber, although it cannot handle heavy metal drilling.

Wen 4208 weighs only 35lbs allowing you to carry it around to the Jobsite. It also has a depth lock that will enable you to set and drill holes with equal distance. Its table is iron cast for durability measuring 6.5 by 6.5 inches to accommodate wide limber up to 10 inches. Moreover, its table has a beveling angle of 45 degrees, both left and right.

Key Features

  • Power: 3 amps at 120V
  • Motor: 1/3 HP
  • Speed: 780-3140RPM
  • Chuck: 1/2-Inch, Keyed
  • Cut depth: 2 inches
  • Table: 6-1/2 inches, 45 degrees beveling

Pros

  • It is light and easy to carry around
  • Depth adjustment stop for uniform drilling
  • Five variable speeds
  • It has an adjustable/removable table
  • Straight forward design for smooth operation

Cons

  • Requires assembly
  • Small swing capacity limits you to small pieces.

Top FAQs

Q: What is the drill depth capacity for this drill press?

2 inches

Q: Can I use this to drill finishes on metallic applications?

A: Yes. You can do this on thin metallic layers, such as ¼ inches. You need a powerful drill bit. You also need to work at a low speed.

Q: Is the chuck replaceable?

A: Sure

Q: Does this drill press have the reverse option?

A: No

Q: Does the drill press have a laser guide?

A: No

Direct comparison of WEN 4214, 4210 and 4208 drill presses

Speed

WEN drill presses are very convenient, allowing you to choose from five different speed options, which makes it easy to customize the speed for each project. Lower speeds are accompanied by the highest torque, which is why the most powerful drill presses will also have the lowest minimum speeds. WEN 4214 is the most attractive in terms of speed options allowing you to set the speed anywhere from 580RPM for metal and 3200RPM for softwood. It also has an LED display to show you the exact speed you are running.

4210 has a minimum speed of 600RPM for drilling light metal, hardened ceramic, and fiber. It is not suitable for drilling through metal over 1-Inch thick. 4208, on the other hand, starts at 780RPM ideal for drilling through thin aluminum or iron sheets. 4208 can still handle any woodwork, although not very effective for commercial projects.

Read More:  Ryobi P271 vs P205G Review

Drill depth

The depth capacity determines the actual ability of your drill press. It depends on the horsepower of the motor on the drill press. A higher depth capacity means you can handle more demanding projects. You also need to use a matching drill bit to ensure the best result. All these drill presses also have a depth stop adjustment that makes it possible to make uniform drills.

WEN 4214 has the highest drill depth capacity in this review at 3-1/8 inches. This is because of its powerful 2/3HP motor and an accompanying metallic 5/8-inch chuck, which can take your largest bits. It can drill through any tough material, including steel provided you have a matching bit. Wen 4210 can drill 2.5 inches and has a 1.3HP motor. It is best suited for light metal drilling and any range of woodwork.

Table 

WEN drill presses have durable tables with a rugged iron cast build that can withstand harsh work environments. Wen tables allow a beveling angle of 45 degrees left and right, which can handle most angled drilling applications. A larger table is always more attractive, which is why 4214 is a great choice. Its table is 9.5 inches, which has enough room for large pieces of lumber. 4210 has a 7-5/8-inch table while 4208 has the smallest table measuring just 6.5 inches, which is too small for large pieces over 12 inches.

Chuck

Wobbly chicks are a major concern when dealing with most cheap drill presses in the market. WEN uses universal ½ inch chucks on their drills, which accept most drill bits available in the market. WEN 4214 has the sturdiest chuck, which increases the precision of your drills, especially when handling high-speed operations. WEN 4208 gets slightly wobbly when drilling above 2100RPM, which is why it is not the best drill press for commercial projects.

Final note

A drill press is the most crucial tool for any workshop after a table saw, which is why you have to be very keen when buying one. WEN has five major brands of drill presses designed to accommodate the most demanding jobs in a workshop, as well as light tasks for homeowners. WEN 4214 has all the properties you need to perform heavy-duty drilling applications in a workshop. If you only need a drill for standard projects at home, 4210 or 4208 will do depending on your budget and the nature of woodwork you intend to perform.

Leave a Reply

Your email address will not be published. Required fields are marked *