Bosch Ros20vsc vs ROS10 vs Makita BO5041K Orbital Sander

If you love do-it-yourself home improvement projects or you want to advance your craft. A reliable and quality orbital sander is a smart investment. It will make your project look great, just like a real pro.

And when it comes to deciding which random orbital sander brand should you choose, Bosch and Makita have already proven its worth. For a long time they have been producing high-end quality devices for various carpentry uses.

The things you should take note of upon determining which random orbital sander is for you is its comfortability, power, dust removal, speed variation, and of course, smooth finish. With all of this considered, you can now decide if it’s worth your budget.

We know that you are excited about purchasing one for yourself, but are a bit intimidated with all the choices and those claiming to be the best in the industry. Let us help you get through your selection ordeal.

In this article, we will be comparing three orbital sanders, all of which have premium components. If you are ready to check out our comparison of the orbital sanders, let’s get started.

Quick Summary

Both Bosch ROS20VSC and Bosch ROS10 have highly prescribed sanders for novices and seasoned users alike because of how easy it is to use.

However, Makita BO5041K, with its high-end sanding capacity guaranteed by the variable speed operation mode and comfortability, is no doubt the most reliable random orbital sander for the money.

If you’re not satisfied with that summary, then, here’s a breakdown of each random orbital sander spec for spec. Read this and decide which random orbital sander will better suit your needs:

Let’s Compare Bosch ROS20VSC, ROS10 and Makita BO5041K

Bosch ROS20VSC

Bosch ROS20VSC Palm Sander - 2.5 Amp 5 in. Corded Variable Speed Random Orbital Sander/Polisher Kit with Dust Collector and Soft Carrying Bag

It is one of the best dual-action orbital sanders for the money. It is a complete kit or package rather than a standalone bare-tool.

Unlike other single-speed sanders, it can reduce or increase its speed depending on the application. Whether you want to clean out a dirty countertop without ending up with scuff marks or sand through raw timber, the ROS20VSC is quite dependable.

Smooth Finish

The Bosch ROS20VSC is better than most with regards to getting the most consistent sanding results. This is due to its different speeds, safely snared pad, and 2.5-amp motor.

Speed Variation

Bosch ROS20VSC Palm Sander - 2.5 Amp 5 in. Corded Variable Speed Random Orbital Sander/Polisher Kit with Dust Collector and Soft Carrying BagDepending on how heavy or light your task is, the speed of the Bosch ROS20VSC can be flexible. Efficient fine grinding at 7,500 OPM with fine sandpaper as you do it slow or have the coarse sandpaper smoothen the tough material at 12, 000 OPM..


No worries about your arms getting tired or getting carpal tunnel disorder with your palms. Its handle is delicate grasp and fits flawlessly in your palm without making you hold it at an uncomfortable or exhausting position. The convenient design of ROS20VSC’s low-vibration is commendable.

Read More:  Bucktool Bench Sander BD4801 vs BD4603: Which is Better

Dust Removal

This tool has a built-in microfilter system that traps particles as small as 1/2 micron in diameter. The microfilter dust canister curtails dust spillback into the sander. It ensures that users aren’t breathing in too much dust on the job.

What We Like:

  • It’s the most user-friendly random orbit sander out there.
  • Great Tool Great Price
  • Ergonomically comfortable
  • contains 35,000 long-lasting hooks

What We Don’t Like:

It’s not very dynamic. It just doesn’t cut as quick you could easily see swirl marks, and the Bosch left a much coarser finish using the same grit paper. It doesn’t appear to matter if you use light, medium, or heavy pressure.

Its longevity is called into question when its used versions are so easy to break down. Most users suggest always buy brand new because of the reconditioned or refurbished versions.

This unit can barely work or sand through anything.

Top FAQ’s:

Q: What is the difference between this and the ROS20VSK version?

A: The ROS20VS is the same sander in both kits. The difference is the ROS20VCS will have a soft canvas carrying bag, and the ROS20VSCK will include a hard carrying case.

Q: Will the dust collection connection on the sander body accept a vacuum hose?

A: Yes, there is an adapter (part # VAC002) that will adapt the sander to standard vacuum hose sizes (1-1/4″ & 1-1/2″ hoses).

Q: Can this be used to smooth joint compound?

A: The Bosch ROS20VSC is designed for metal, wood, and paint sanding. So, yes, it can be used to sand a joint compound if you are using a higher grit paper (180/220).

Bosch ROS10

Bosch ROS10 120 Volt Random Orbit SanderWoodworkers that desires a smooth finish, comfortable operation, and advanced dust-control will enjoy the Bosch ROS10. It unites an ergonomic design with smooth orbital action, a twist-off filtered dust canister, and premium features for stable all-around sanding performance.

Smooth Finish

The Soft Mісrосеllulаr Bасkіng Pаd оr a рlіаblе pad ensures a ѕmооth fіnе finish on bоth flаt оr соntоurеd surfaces It hаѕ a rаndоm orbit sanding асtіоn whісh gіvеѕ a blended аnd ultra-smooth fіnіѕh with a fаѕt removal rate


Bosch ROS10 120 Volt Random Orbit Sander

Thіѕ іѕ a lіght wеіght (3.3 роundѕ) sander. It wоrkѕ at a hіgh vоltаgе оf 120 vоltѕ. It starts up ѕmооthlу аnd іtѕ low vіbrаtіоn design іnсrеаѕеѕ uѕеr comfort. It is quite easy tо hаndlе аnd uѕе.

Speed Variation

With a соmfоrtаblе soft-grip tор аnd bоdу design, thіѕ 2.5 Amр sander dеlіvеrѕ 12,000 OPM for fіrѕt-сlаѕѕ ѕtосk rеmоvаl.

Dust Removal

Thе Bosch Mісrо Fіltеr Sуѕtеm also knоwn аѕ optimal on-board system filters оff thе duѕt vеrу еffесtіvеlу trapping аll the dеbrіѕ аnd dust раrtісlеѕ.

It also hаѕ a Twіѕt-Off Duѕt Cаnіѕtеr whісh ѕhоwѕ thе dust level in the sander аnd is еаѕіlу dеtасhеd tо.

What We Like:

  • Soft-grip top and body
  • Light аnd еаѕу tо handle
  • 35,000 long-life hooks
  • Lоw vіbrаtіоn dеѕіgn
Read More:  PORTER-CABLE 352VS vs WEN 6502T Belt Sander | Ultimate Battle

What We Don’t Like:

It was a pain and would halt the spinning when I added a little more pressure for more aggressive removal. Thе on-board filter may wear off wіth the passage оf time duе tо it’s a low-quality plastic coating. It іѕ аlѕо quite difficult tо tаkе thе cover оff the fіltеr.

Top FAQ’s:

Q: Can this be used on wet surfaces? I would like to use it for felting wool.

A: The ROS10 Sander is designed for dry sanding. It is to avoid water coming into the motor, which may cause malfunction.

Q: Can it be used with 230v?

A: The ROS10 is 120V; to use it with 220/230V, you will need a power converter. Unfortunately, we do not make a power converter.

Q: Does it include a vacuum adapter

A: The ROS10 will include a vacuum hose adapter.

Q: Where do I find replacement filters for this?

A: The filters are non-replaceable, the canister would need to be replaced.

Makita BO5041K

Makita BO5041K 5-Inch Random Orbit Sander Kit

Hobbyists and artisans may not get quite as much utility out of this specific unit. They may flinch at the thought of reducing expenses on a carpentry instrument that won’t be needed most of the time, yet we agree that Makita deserves putting a high price on their products.

We all know that there are cheaper alternatives compared to what Makita BO5041K is offering. However, it will be a challenge to find a tool which can match Makita’s adjustability, power, and flawless design.

Smooth Finish

The excellent quality hard plastic body is housing a 3 Amp motor that has enough power that, even with some added tension, will not bog down nor get hot. It will not lag down, and that’s an essential factor for an evenly sanded surface.


Makita BO5041K 5-Inch Random Orbit Sander Kit

Extra comfort and ease-of-use features carry a new front handle which is adjustable to support sanding in small spaces and cramped areas, as well as ergonomic rubberized handles for refined operator comfort and control.

Speed Variation

You’ll always be in complete control over this random orbital sander even with tougher grits and when you kick it into high gear at 12,000 OPM.

Dust removal

It has an efficient through-the-pad dust collection system that helps provide a cleaner work environment. For improved dust collection, they engineered an efficient and heavy duty dust collector which also houses a vacuum port adaptor.

What we like

  • Dual handle mechanism reduces a lot of fatigue
  • The motor is reliable, and the dust container is easy to clean
  • Best Build Quality
  • Low vibration at max speed

What we don’t like

From the most recent time I used this sander, its efficiency is exciting. However, I’ve been hearing other users complaining about their sander throwing discs. It has been a year already and I believe that I haven’t utilized 30 discs yet. It appears that the velcro grippers diminished its hold sooner than what’s promised.

Top FAQ’s:

Q: Do they accept refunds?

A: Yes, if you are not satisfied with any Makita tool within 30 days of purchase, return it, and Makita will provide a replacement or refund.

Read More:  RIKON 50-151 vs RIKON 50-161VS Belt Sander | Which is Better

Q: Can the rubber pads be switched when the Velcro’s worn down?

A: Yes, they can be replaced, and Amazon has the new pads

Q: Can I use the sander to remove varnish or polyurethane from doors?

A: Yes, just make sure you use very fine-grade sandpaper (disc). Try applying to paint remover first. It may save you time and effort.

Which is better? Bosch ROS20VSC, Bosch ROS10 or Makita BO5041K?

When trying to determine the best random orbital sander for your demanding woodwork projects, it’s essential to evaluate a variety of different factors. It has to be equipped to perform quickly and efficiently on all the tasks you will be performing.

Bosch ROS10 and ROS20VSK include a 2.5 amp motor for the faster operation whereas Makita BO5041 indulge 3.0 Amp motor. So if you are looking for a high AMP motor for your tasks, then Makita is the choice.

An orbital sander needs at least one handle for providing support to the workers. Comparing the three models, Bosch ROS10 and Bosch ROS20VSC have a single handle, while the last model Makita BO5041 incorporates handles at two sides for producing the more profound comfort and support to the operator.

If you need the sander for tasks that demands high woodworking handling and more stringent applications, then Makita BO5041 would be a wise choice. Considering the power, coverage, and comfortability, Makita BO5041 takes the lead while it also takes the highest place in terms of price.

Final Thoughts

It is always a thrill whenever we choose our woodworking partners. We always want the best for our money and Bosch and Makita never fail to deliver. Comparing these three ROS, we can say that they all have something different to offer.

These brands are having differences in their features but with one common goal – to improve our craft. When we look closely on the devices mentioned here, we know that we got to pay more for more capabilities. However, tools are just there to help us to do the job, our skills still matter.